| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction of Solid Waste Block Forming machine
The ring structure of solid waste block molding machine has the characteristics of higher working efficiency and lower failure rate than the traditional flat die block molding machine. Agricultural and forestry wastes such as corn straw, wheat straw, cattle and sheep dung, cotton stalk, straw, rice husk, peanut shell, corncob, branches, leaves, wood chips, and waste plastics from paper mills, scraps from clothing factories, and industrial solid waste are crushed and shredded into dense and renewable biomass molding fuel, which is also called RDF fuel rod after industrial solid waste processing. After pressing into blocks, the volume is reduced to about a quarter of the original, which is convenient for storage and transportation, and more resistant to burning.
The working principle of Solid Waste Block Forming machine
The block press forming unit is composed of feeding belt conveyor, block press main machine, discharging belt conveyor, distribution cabinet and other parts. The working principle is: the raw materials to be pressed are shredded, its length is between 10mm~10mm, the moisture content is 15%~30%, the material is fed into the press press feed port by the feeding conveyor, the press block host is compressed under the appropriate temperature and pressure, and the discharge port falls into the discharge belt conveyor.
(Note: According to the different raw materials, the material moisture content and grinding particle size will be different, the specific parameters can consult our technical personnel)
| Model | hole(pcs) | Power | Capacity | Molding size | Particle density | |
| Biomass, straw | Industrial solid waste | |||||
| RDF-1500 | 36 | 45 | 1.0-1.5 | 0.5-1.0 | 32*32*(50-100)mm | 0.8-1.3(t/m³) |
| RDF-2500 | 48 | 75 | 1.5-2.5 | 1.0-1.5 | ||
| RDF-3500 | 72 | 110 | 2.5-3.5 | 2.0-2.5 | ||
| RDF-4500 | 72 | 110 | 2.5-3.5 | 2.0-2.5 | ||
| RDF-4500 | 90 | 75*2 | 3.5-5.0 | 2.5-3.0 | ||
| RDF-4500 | 90 | 132 | 3.5-5.0 | 2.5-3.0 | ||
| RDF-6000 | 120 | 200 | 4.0-6.0 | 3.0-4.0 | ||
| RDF-8000 | 150 | 250 | 6.0-10.0 | 4.0-6.0 | ||
Characteristics of Solid Waste Block Forming machine
1. The machine adopts a new compression mode, changes the vertical ring mold structure to the flat ring mode of production, and uses the principle of rotating centrifugal force to evenly distribute raw materials to all molding molds, avoiding the phenomenon of the local material is too centered and caused by the boring, greatly reducing the unit energy consumption.
2. The equipment is specially designed for the characteristics of raw materials with high lignin and difficult molding.
3. Multi-channel seal design prevents dust from entering the bearing lubrication part. The unique die design and the interaction principle of extrusion pressure, friction force and shear force between the rolling wheel make the forming rate smooth discharge under the premise of 100%, and the production efficiency is high.
4. According to the different materials, cooling and heating can be used to increase the output of the pressing block. Cooling uses the principle of automobile engine cooling technology to force the humidity of the grinding disc to decrease, and heating uses high-efficiency heating couples to rapidly heat the grinding tool to improve the production conditions and ensure the stability of continuous work of the equipment.
Finished biomass briquette,clothes briquette and straw briquette
Our cube briquette press machine can press waste agricultural alfafa and corn stalks into pellet by adjusting compressed density,which can be used for feed cow and sheep and other animals. 1.Raw materials:hay,straw,forage,alfalfa,peanut shell,corn stalks,bean stalks,etc
2.The density is 20-30 times higher than the original straw, which is convenient for transportation and storage.
3.During the press process, the straw produces high temperature (100°C), which has a slight paste taste, which is loved by livestock, and the feed intake rate can reach 100%
4.High temperature and high pressure, insecticide and sterilization, no additives, pure natural feed, safe feeding. Good for digestion by livestock
5.The briquette size is 32*32*20-80mm, which can meet the needs of ruminants for crude fiber
Application for Charcoal Briquette :
1. Who are we?
We are based in Tianjin, China, start from 2020,sell to South Asia(20.00%),South America(15.00%),North America(12.00%),Domestic
Market(10.00%),Mid East(10.00%),Africa(10.00%),Southeast Asia(10.00%),Eastern Europe(2.00%),Southern Europe(1.00%). There are
total about 101-200 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
pellet mill,wood crusher,wood chipper shredder,floating feed extruder,feed mixer
4. Why should you buy from us not from other suppliers?
Our MIKIM Machine adopt word-famous brand for the key electronic elements, pneumatic and hydraulic system to ensure high quality
and reliable of the Agriculture machinery and feed machinery After the unremitting efforts of all staffs ,
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,DDP,DDU;
Accepted Payment Currency:USD,EUR,AUD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union;
Language Spoken:English,Chinese,Spanish
){kind=link}